Houston, TX

Yard

Cab, A/C, Heat, Auxilliary Hydraulics, 42", 48", 60" Buckets w/Teeth

OROPS (Open Cab), Blade, Auxiliary Hydraulics, 12" and 24" Buckets

Tomball, TX

Cab, A/C, Heat, R Boom, 48" Bucket w/Teeth | Doosan, Engine Model DL06P, Net Power 181 HP @ 1,900 RPM, Gross Power 189 HP @ 1,900 RPM, Max Torque 593 Lb-Ft @ 1,400 RPM, Number Of Cylinders 6, Aspiration Turbocharged Air-To-Air Intercooled, Emissions Tier 4 Final, Fuel Tank Capacity 81.9 Gal, Hydraulic System Capacity 60.8 Gal, Hydraulic Tank Capacity 50.2 Gal, DEF Tank Capacity 9.3 Gal, Engine Oil Capacity 7.2 Gal, Cooling System Capacity 8.2 Gal, Swing Drive Fluid Capacity 1.4 Gal, Travel Device Fluid Capacity (Each) 0.8 Gal, Electrical System 24 V, Alternator 80 Amps, Batteries 2 × 12 V 100 Ah, Travel Speed Low 2 MPH, Travel Speed High 3.7 MPH, Swing Speed 11.3 RPM, Drawbar Pull 64,375 Lb, Track Shoes Per Side 49, Standard Track Shoe Width 24", Optional Track Shoe Widths 28", 32", 36", Maximum Digging Depth 21' 10", Maximum Reach At Ground Level 31' 6", Maximum Loading Height 26' 1", Bucket Capacity Approx. 1.2 Yd³, Overall Length Approx. 29' 6", Shipping Height 9' 9", Shipping Width 9' 10".

Cab, A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 36" Bucket w/Teeth

Houston TX

Cab, A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 12",24" Buckets w/Teeth

Cab, A/C, Heat, R Boom, Cat C3.4B Engine-Tier 4 Final (No DEF Required), Runs On Ultra Low Sulfur Diesel, TBG Pads, 48" Bucket w/Teeth

TechPro

Cab, A/C, Heat, Auxilliary Hydraulics, Fortress 95R Shear (Weight 21,600 Lbs, Jaw Opening , Jaw Depth 42", Reach 13' 7", Carrier Weight Boom Mount 105,000–200,000 Lbs, Carrier Weight Stick Mount 185,000–250,000 Lbs) | Net Horsepower 362–388 HP, Engine Isuzu 6-Cylinder Diesel, Bucket Capacity 2.7 CY, Max Dig Depth 27' 2", Max Reach At Ground 40' 3", Max Dump Height 25' 6", Max Cutting Height 36', Vertical Wall Dig Depth 24', Overall Width 11'–13', Overall Height 11', Tail Swing Radius 12', Track Length On Ground 17' 11", Shoe Width 24"–35", Ground Pressure 8–12 PSI, Travel Speed 2.3–3.4 MPH, Swing Speed 9.6 RPM, Swing Torque 109,000 Lb-Ft, Bucket Digging Force 64,000 Lbs, Arm Crowd Force 45,000–50,000 Lbs, Hydraulic Flow 204 GPM, System Pressure 4,600–5,100 PSI, Fuel Capacity 178 Gallons, Hydraulic System Capacity 135 Gallons, Hydraulic Tank Capacity 82 Gallons, Engine Oil Capacity 16 Gallons, Cooling System Capacity 20 Gallons

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth 

Cab, A/C, Heat, R Boom, 24",36",48" Buckets w/Teeth

Cab, A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth

Spring, TX

Brand new Caterpillar 302.7, 9'+ dig depth, canopy, contracting tracks to fit in backyard, 24" bucket, strong machine, perfect for trenching

Crosby, TX

Brand new Caterpillar 302.7, 9'+ dig depth, canopy, contracting tracks to fit in backyard, 12" bucket, strong machine, perfect for trenching

Cab, A/C, Heat, Blade, Long Arm, Auxilliary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth

low hour 2021 17G. Well maintained. 
Open cab
Retracts to 39” if desired for tight fits
Comes with equipped  with 12” bucket and also has 9” 

Located in Katy Texas

Katy, TX

The 925E model is powered by a Cummins QSB6.7 engine that produces 190 horsepower and 597 lb-ft of peak torque. The 925E has a maximum digging depth of 22 ft 8 in, a maximum digging reach of 33 ft 3 in, and a maximum dumping height of 22 ft 8 in. 

Dickinson, TX

Cab, A/C, Heat, Auxilliary Hydraulics, Quick Coupler, 66" Bucket w/Teeth | Deere 350 P-Tier Mid-Size Excavator, Powered By A John Deere PowerTech PSS 9.0 L Diesel Engine Rated At Approximately 271 Net HP At 1,900 RPM, Tier 4 Emissions Compliant, Six Cylinder Turbocharged Engine, Operating Weight Approximately 80,985 Lb, Maximum Digging Depth Around 26' 10", Maximum Reach At Ground Level Approximately 35' 9", Maximum Dig Height Around 34', Transport Length With Mono Boom Approximately 36' 9", Overall Width About 11' 1", Track Shoe Width Approximately 31", Track Length On Ground Around 13' 3", Tail Swing Radius About 11' 10", Ground Clearance Approximately 19.6", Travel Speed Up To 3.1 MPH, Bucket Breakout Force Approximately 55,300 Lb, Swing Speed Around 10.7 RPM, Ground Bearing Pressure Approximately 7.27 PSI, Total Hydraulic Flow Around 152 Gpm, Fuel Tank Capacity Approximately 166 Gallons, Hydraulic Tank Capacity Around 51 Gallons, Designed For Heavy Duty Excavation, Trenching, Loading, Pipe Laying, And General Construction Applications

Porter, TX

Rosenberg, TX

OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Thumb, 6", 10" Buckets w/Teeth, 20" Grading Bucket, Root Rake

Magnolia, TX

OROPS (Open Cab), Blade, 12", 24", 36" Buckets w/Teeth





Missouri City, TX

OROPS, Blade, Auxillary Hydraulics, Hydraulic Thumb, 12", 18" Bucket w/Teeth, 36" Hydraulic Tilt Bucket

EROPS (Cab), Yanmar Engine, Heat, Blade, Expandable Tracks Auxilliary Hydraulics, Hydraulic Thumb, 18" Bucket w/Teeth

	
	




Splendora, TX

 OROPS,
 18" Bucket,
Leveling Blade,
9'6" Max Digging Depth,
Joystick Controls

Cab/AC,
Quick Coupler,
48” or 36" Bucket,
9'6" Stick,
Triple Grouser Pads,
Undercarriage 95% 
Auxillary Hydraulics

Cab/AC,
Quick Coupler,
Manuel Thumb,
48” or 36" Bucket,
9'6" Stick,
Undercarriage 95% 

Cab/AC,
36" or 48" Bucket,  
9'6" Stick,
Undercarriage 95%,
Triple Grouser Tracks

Cab/AC,
60" Bucket,
80% Undercarriage,
Triple Grouser Pads

Cab/AC,
36" or 48" Bucket,
9'6" Stick,
Undercarriage 95%,
Triple Grouser Tracks

New John Deere 35P-TIER | OROPS (Open Cab), Blade (Angle), Auxilliary Hydraulics, Extended Reach, Hydraulic Thumb, Rear Counterweight, 18", 24" Bucket w/Teeth


New Caney, TX

Conroe, TX

CAT 302.7 Mini Excavator, 12" or 24" Bucket

Sugar Land, Tx

Conroe Yard

2025 Bobcat E35I | EROPS (Cab), A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 16" Bucket w/Teeth

Richmond, TX

Enclosed Cab, Rear View Camera, 18,600 lb Operating Weight, 15 ft Dig Depth, Max Dump Height: 207 in; Auxiliary Hydraulics, Quick Attach, Foot Control To Operate Breaker Hammer, Hydraulic Thumb, Pattern Changer, 4 Way Backfill Blade, Coupler, Left & right Offset Boom, Rubber Tracks, Maximum Reach 24 ft, 16,565 Lbs Maximum Bucket Breaking Force, 3.1 MPH Maximum Travel Speed, 69.2 HP Yanmar Engine, 33.8 Gals Diesel Fuel Tank Capacity, 7' 3" Wide, It Comes With Only 1 Bucket Either A 36 inch Or A 12 Inch. Second Bucket Available For Rent. AC And Heat Working Great.

Sealy, TX

Cab, A/C, Heat, Blade, Auxlliary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth

Cleveland, TX

Montgomery, TX

Almost brand new machine. Cab,  A/C, heat, radio, dozer blade, hydraulic thumb. 24” bucket. 
Rubber tracks, 2speed, LED work lights, safety beacon. 

El Campo, TX

Chappell Hill, TX

Washington, TX

EROPS (Cab), A/C (Blows Cold), Radio, Good Working Order, 52" Heavy Duty Bucket----General Specifications
Operating Weight: 54,895 lbs (24,900 kg)

Engine: Isuzu AH-4HK1X, 4-cylinder, turbocharged

Net Power: 177 HP (132 kW) @ 2,000 rpm

Max Torque: 469 lb-ft @ 1,500 rpm

Fuel Capacity: 108.4 gallons

Hydraulic System Flow: 123.6 gallons/minute

Hydraulic Relief Pressure: 4,970 psi

Swing Speed: 10.7 rpm

Swing Torque: 51,480 lb-ft

Dimensions
Shipping Length: 32 ft 6 in (9.91 m)

Shipping Height: 10 ft 2 in (3.09 m)

Width (with 31.5" shoes): 11 ft 1 in (3.39 m)

Track Gauge: 8.5 ft (2.59 m)

Ground Clearance: 1.51 ft (0.46 m)

Tail Swing Radius: 9.65 ft (2.94 m)

Working Range (with 19'2" boom and 9'10" arm)
Max Dig Depth: 22 ft 8 in (6.9 m)

Max Reach at Ground Level: 33 ft 2 in (10.10 m)

Max Dump Height: 22 ft 2 in (6.76 m)

Max Vertical Wall Depth: 20 ft 2 in (6.14 m)

Bucket Rotation: 175°

Bucket Capacity
Range: 0.76 – 2.43 yd³ (0.58 – 1.86 m³)




College Station, TX

La Grange, TX

Deere 35G. 8K excavator with hydraulic thumb and backfill blade.

Bridge City, TX

26G Deere 6k excavator with hydraulic thumb and backfill blade

Normangee, TX

Cab, A/C, Aux. Hydraulics, Rubber Tracks, 24" Bucket

New Summerfield, TX

Pollok, TX

8000 LB MACHINE WITH ANGLE BLADE AND THUMB

OROPS (Open Cab), Blade, Auxilliary Hydraulics, 12" OR 18" Bucket w/Teeth, Hammer, Auger

Victoria, TX

2024 kubota kx033-4 angle blade 18” bucket has connections for hydraulic attachments quick connect cabbed unit a/c and heat

Dale, TX

Texas

Lake Charles, La

Cab, A/C, Hydraulic Thumb, Rubber Tracks, 24" Bucket

Mini excavator with 18 and 24” buckets 

OROPS (Open Cab), Blade, Pattern Changer, Auxillary Hydraulics, Quick Coupler, 24" Bucket


Nacogdoches, TX

Tyler, TX

Electric Mini-Excavator | OROPS (Open Cab), Blade, , Bucket, narrow and wide bucket, ripper , fits thru 30" wide door

Hutto, TX

Cab, A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 18",24",30",36" Buckets w/Teeth, 48" Grading Bucket

Round Rock, TX

OROPS (Open Cab), Blade, Auxillary Hydraulics, Fixed Thumb, 16" Bucket

Springfield, IL

Open Cab (OROPS), Auxiliary Hydraulics, Bucket and Hydraulic Thumb Included

Cheboygan, MI

OROPS, Blade, Stiff Thumb, 12" Bucket w/Teeth

Engine: 13.5 HP (Gas Powered, Briggs & Stratton XR1200 or Rato)

Transmission: Hydrostatic

Track Type: Rubber

Travel Speed: 1.1 mph (Low Mode)

Bucket: 12 Inch Digging Bucket with Side Scrapers

Thumb: Mechanical Thumb Included

Blade: 35 Inch Hydraulic Dozer Blade

Max Digging Depth: 5.4 Feet

Max Reach: 75 Inches

ROPS: Open Canopy with Roll-Over Protection

Use Cases: Landscaping, Utility Work, Trenching, Light Construction

Features: Compact Design, Auxiliary Hydraulics, Front Control Setup

La Crosse, WI

EROPS (Cab), Auxiliary Hydraulics, Bucket, Hydraulic Thumb, 2' 8" Stick

Pleasant Plains, IL

OROPS (Open Cab), Blade, Hydraulic Thumb, 6" Bucket w/Teeth, 6" Auger

Naugatuck, CT

Baxley, GA

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, 12" Bucket w/Teeth | Weight And Power
Operating Weight Approximately 4,000 Lb Including Fuel, Oil, And Operator
Standard Weight Listed Around 2,480 Lb

Engine
Powered By A Kubota Diesel Engine Rated Around 11.2 Hp, Two Cylinder
Hydrostatic Drive System

Undercarriage
Rubber Tracks Approximately 7 In Wide

Blade And Attachments
Front Blade Included, About 43 In Wide
Bucket Typically 14.5 In Wide, Expanded To 16 In With Side Scrapers
Hydraulic Thumb And Auxiliary Hydraulic Plumbing Available

Dimensions And Reach
Transport Width Around 3 Ft 8 In
Transport Length Near 9 Ft 11 In
Transport Height About 7 Ft 6 In
Maximum Digging Radius Around 128 In
Digging Depth Approximately 83 In
Digging Height About 112 In
Dumping Height Roughly 79 In
Ground Clearance Around 8.25 In

Performance
Approximate Lift Capacity 4,000 Lb
Operating Angle Approximately 30 Percent Climbing Capability

Configuration
Roll Over Protective Structure With Canopy (Rops) And Pilot Style Boom Control

Visalia, CA



OROPS, Blade, Auxillary Hydraulics, Hydraulic Thumb, 12" Digging Bucket -- Engine Make

Laidong/ Kubota Engine Tier 5

Engine Model

385/ D722

Engine Power /Rotation speed

18.2KW/10.2kw14HP)2500rpm

Number of cylinder

3

Maximum Travel speed

4km/h

Width of track shoe

230mm

Number of track shoe per side

38pcs

Number of upper roller per side

1

Number of bottom roller per side

3

Performance Parameter

Standard Bucket capacity

0.03m³

Swing speed

9 rpm

Max. Grade ability

35°

Maximum Bucket digging force

18KN

Maximum Arm digging force

11KN

Hydraulic system pressure

18.2Mpa

Machine weight

1650kg

Machine Size

Overall dimension (L*W*H)

2550*1100/1400*2310mm

Wheel base

1100mm

Chassis width

1100mm

Axle base(Track length on ground)

1300mm

Track width

180mm

Min.Ground clearance

380mm

Working Range

Maximum Digging height

2740mm

Maximum Dumping height

2100mm

Maximum Digging depth

2150mm

Maximum Vertical digging depth

2320mm

Maximum Digging radius

2400mm

Minimum swing radius

1190mm

Maximum Lifting height of blade

325mm

Maximum Cutting depth of blade

175mm

Boom swing angle(Left)

75°

Boom swing angle(Right)

45°

Riverview, FL

OROPS (Open Cab), Blade, 18" Bucket w/Teeth

Santa Ana, CA

OROPS (Open Cab), Blade, 12", 18", 24" Buckets w/Teeth

Pinson, AL

OROPS (Open Cab), Blade, 12" and 18" Buckets w/Teeth

Labelle, FL

Great Running Excavator with Auto Blade - (OROPS) Open Cab - Bucket Included. 

Dallas, GA

OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Thumb, 12" Bucket w/Teeth | Get your project moving with the reliable and efficient 2019 John Deere 17G Mini Excavator.
Perfect for landscaping, small construction projects, utility work, demolition projects, and fence row clearing.
Features:
• Extendable undercarriage and foldable blade, minimum width of 3’3” and maximum width of 4’2”
• 15 HP diesel engine
• Maximum digging depth of 7 feet 2 inches, and maximum cutting height of 11’7”
• Canopy for operator comfort
• 12” bucket, with a hydraulic thumb
• Machine weight is 3,800 lbs, with a maximum lift capacity of 1015 lbs over the front, and 470 pounds over the side.

Seymour, MO

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, Quick Coupler, 12" Bucket w/Teeth, 18", 36" Cleanout Buckets, Remaining Warranty Balance is 3 years/3,000 Hours ||| BUY IT NOW AND RENT TO OWN (ATTACHMENTS EXTRA COST) 

Operating Weight: 3,968.3 lbs (1,800 kg)

Engine: Kubota D902, Tier 4 Final

Rated Power: 15.8 HP @ 2,300 rpm

Maximum Torque: 37.8 ft-lb @ 1,800 rpm

Displacement: 54.8 in³ (0.898 L)

Bucket Capacity: 0.05 yd³ (0.04 m³)

Bucket Digging Force: 3,596.9 lbf (16 kN)

Arm Digging Force: 2,248.1 lbf (10 kN)

Travel Speed: 1.5 – 2.1 mph (2.4 – 3.3 km/h)

Swing Speed: 9 rpm

Gradeability: 30°

Ground Pressure: 4.1 psi

Pasco, WA

Open Cab (OROPS) - 18” Bucket - Full Inspection and Preventative Maintenance Completed.

Scottsdale, AZ

OROPS (Open Cab), Blade, 12", 24" Buckets w/Teeth

Georgetown, TX

OROPS (Open Cab), Blade, Retractable Undercarriage, 12" Bucket w/Teeth

Newnan

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, Bucket w/Teeth, Grading Bucket (w/Edge Available Extra Cost) | 22 HP Yanmar Engine NON-Emmissions!!, Low Hours. Newer Tracks, Runs/Operates Perfectly 

Waterbury, CT

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, 16" Bucket w/Teeth, Low Hours, Very Well Maintained, Runs And Operates Great

Olive Branch, MS

OROPS, Blade, Auxillary Hydraulics, Hydraulic Thumb, 18" Bucket w/Teeth, Only 454 Hours, Excellent Mechanical & Cosmetic Condition, Fully Serviced & Maintained, No Known Issues, Ready For Immediate Work

Palmetto, FL

3,300lbs, 25 HP, Mini Skid Steer, Standard Bucket

Albany, OR

OROPS (Open Cab), Auxiilary Hydraulic, Hydraulic Thumb, Manual Coupler, Hydraulic Thumb, Manual Coupler, 18" Bucket, Remaining Warranty Balance is 3 years/3,000 Hours  (ADDITIONAL BUCKETS AND ATTACHMENTS AVAILABLE FOR SALE) |||  20.7 HP Kubota Diesel D1105/Tier 4F, Rubber Tracks, Dual Aux Hydraulic Circuits, 6,129 Lbs.
Thumb: Hydraulic Thumb
Bucket Coupler: Manual Coupler
Blade: Hydraulic Two Way
Aux Hydraulic: Dual Circuits
Tracks: Rubber
Controls: Pilot Operated Joysticks, Control Pattern Changer
Special Features: Offsetting Boom, Zero-Tail Swing, LED Work Lights
Engine: 20.7 HP Kubota Diesel D1105/Tier 4F
Operating Weight: 6,129 Lb.
Standard Bucket Capacity: 18” Wide, 0.08 Yd
Digging Depth Max: 9’2”
Travel Speed: 1.2-1.9 MPH
Bucket Digging Force: 5170 Lbf.
Arm Digging Force: 3147 Lbf.

2022 Yanmar SV40 Only 1,400 Hours | OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Quick Coupler, Hydraulic Thumb, 24" Bucket w/Teeth

Lakeland, FL

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, 18" Bucket w/Teeth, Hammer



Stephenson, VA

2020 Cast 28T Loader, Telescoping Boom, Kubota 25 HP D1105 Engine, Weight 3400 LBS, Lift 2000 LBS, Pin Height 10', Ag Bar Tires, Telescoping BoomHeated Seat, LED Lights, 52" Bucket  (MACHINE IS BEING SOLD WITH BUCKET ONLY ADDITIONAL ATTACHMENTS SOLD SEPARATELY). Forks $1,000, Log Grapple $4,300

Farmington, NY

Cab, A/C, Heat, Blade, Hydraulic Thumb, 12",24" Buckets w/Teeth

Moore, SC

OROPS (Open Cab), Angle Blade, Auxillary Hydraulics, Hydraulic Thumb, 18" Bucket w/Teeth

Hilton Head Island, SC

Cast 25 Genesis Loader, Yanmar 25 hp Diesel Engine, Telescoping Boom, 109" Pin Height. 1600 LBS. Lift Capacity, Heated Seat, Wide Turf Tires, 52" Bucket (MACHINE IS BEING SOLD WITH BUCKET ONLY ADDITIONAL ATTACHMENTS SOLD SEPARATELY). Forks $1,000, Log Grapple $4,300

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth, Extra Exterior Lights

Iota, LA

EROPS (Cab), A/C, Heat, Blade, Auxillary Hydraulics, Hydraulic Thumb, Trenching Bucket, Bucket, Hydraulic Tilt Buckets | Low Hours, Very Clean Machine

Auburn, NH

OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Thumb, 12" Bucket w/Teeth

Waco, TX

Hitachi ZX35U-5N Mini Excavator Cab, A/C, Heat,
Electronic Changeable Controls, Hydraulic Thumb, Bucket, Blade

North Franklin, CT

Cfg Industry STE 35 SR mini excavator, 24 inch and 16 inch buckets. With hammer attachment.

Saint Cloud, FL

OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Thumb, 12" Bucket w/Teeth | Yanmar 3TNV88F Diesel, Engine Power 23 Hp @ 2,200 RPM, Fuel Tank Capacity 11 Gal, Bucket Capacity 3.2 Ft³, Maximum Digging Depth 9 Ft 9 In, Maximum Reach 15' 8", Ground Pressure 4.1 PSI, Travel Speed Low/High 1.7/2.9 MPH, Swing Speed 9 RPM, Boom Swing 50° Left/80° Right

Harlem, GA

2023 Knikmops KM85 OROPS (Open Cab) | Engine & Power

Engine: Kubota D902, 2-cylinder turbocharged diesel

Rated Power: 23 Horsepower

Weight & Capacity

Operating Weight: 1,970 lb

Rated Operating Capacity: 1,000 lb (measured 20 inches ahead of wheels)

Maximum Lift Capacity: 1,540 lb (without counterweights)

Performance

Top Speed: Up to 8 mph

Maximum Lift Height (Hinge Pin): Approximately 6.2 feet

Hydraulics

Drive System: Four Hydrostatic Wheel Motors (Full-Time 4WD)

Auxiliary Hydraulic Flow: 7.4 Gallons Per Minute

Hydraulic Pressure: Approximately 2,600 psi

Dimensions

Length (Without Attachment): 98.4 inches

Width (Standard): 35.5 inches

Width (With Dual Wheels): 47.5 inches

Fuel System

Fuel Tank Capacity: 5.3 Gallons

Operator Station & Controls

ROPS/FOPS Open Canopy

Electronic Differential Lock

Joystick Controls with Integrated 12V Outlet

LED Work Lights

Backup Alarm



Lewiston, ID

Cab, A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 18",24" Bucket w/Teeth, 30" Grading Bucket

Washington, PA

OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Thumb, 18" Bucket w/Teeth

EROPS (Cab), Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 18" Bucket | Auger, Hammer (Additional Cost For Purchase)

Mount Bethel, PA

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, Quick Coupler, 12" Bucket w/Teeth, 12". 36" Cleanout Bucket, , 6" x 28" Tall Trenching Bucket w/BOCE ---- BUY IT NOW AND RENT TO OWN (ATTACHMENTS EXTRA COST) Operating Weight: 9,039 lbs (Canopy) / 9,259 lbs (Cab)

Bucket Capacity: 0.16 yd³

Engine: Yanmar 3TNV88F Tier 4 Final

Rated Power: 24.4 hp @ 2,200 rpm

Maximum Torque: 85.3–94.2 Nm @ 1,320 rpm

Travel Speed: 1.4–2.2 mph

Swing Speed: 9 rpm

Displacement: 100 in³ (1.642 L)

Bucket Digging Force: 6,430 lbf

Arm Digging Force: 4,564 lbf



OROPS, (Open Cab), Blade, Auxillary Hydraulics, Quick Coupler, Hydraulic Thumb, Bucket | Additional Buckets & Compaction Wheel Available For Sale ||| Engine: Kubota V2403-M-DI-E3B-BC-5, 4-cylinder diesel

Horsepower: 42.7 hp @ 2,200 rpm

Torque: 152.7 Nm @ 1,400 rpm

Emissions: Tier 4 compliant

Operating Weight: 10,077 lbs

Bucket Digging Force: 7,650 lbf

Arm Digging Force: 5,332 lbf

Rated Lift Capacity: 5,131 lbs @ 118 in radius

Travel Speed:

Low: 1.5 mph

High: 2.6 mph

Ground Pressure: 3.8 psi

Dimensions

Transport Length: 210.8 in

Width: 77.2 in

Height (Top of Cab): 99.7 in

Track Width: 11.8 in

Tail Swing Type: Zero Tail Swing

Digging Capacities

Maximum Dig Depth: 10.8 ft

Maximum Reach at Ground Level: 18.6 ft

Maximum Dump Height: 11.9 ft

Boom Swing:

Left: 75°

Right: 50°

Hydraulic System

Auxiliary Flow: 20 gpm

Auxiliary Pressure: 3,045 psi

Pump Type: Variable displacement, load-sensing piston pump

Features & Options

Standard:

Auto idle

Selectable auxiliary hydraulic flow

Rubber tracks

Quick Tach system

Fingertip boom swing control

Optional:

Cab with heat and air conditioning

Angle blade

Hydraulic clamp

Secondary auxiliary hydraulics

Steel tracks


various buckets and compaction wheel for additional fees No access in pull down for my specifics please modify

Orinda, CA

 EROPS (Cab), A/C, Heat, Blade, Dual Auxillary Hydraulics, Manual Coupler, Hydraulic Thumb, 6" Tall Digging Bucket, 12" Bucket w/Teeth, 12" Cleanout Bucket, 18" Bucket w/Teeth, 24" Bucket w/Teeth, 36" Cleanout Bucket, 36" Root Rate Bucket, Tier 4F ------Engine Model: Yanmar 3TNV88F Emissions: EPA Tier 4 Final compliant Horsepower: 24.4 hp at 2,200 rpm Torque: 62.9–69.5 ft-lb at 1,320 rpm Displacement: 100 in³ Performance Bucket Digging Force: 6,430 lbf Arm Digging Force: 4,564 lbf Travel Speed: 1.4–2.2 mph Swing Speed: 9 rpm Gradeability: 30° Boom Swing: 75° left / 50° right Hydraulic System Pump Type: Load-sensing axial-piston, variable displacement Max Flow Rate: 28.5 gal/min Auxiliary Hydraulic Flow: 10.6 gal/min System Pressure: Arm/Bucket/Travel: 3,916 psi Swing: 2,989 psi Additional Features Enclosed cab with HVAC or open canopy option Hydraulic thumb and quick coupler available Rubber tracks standard, steel tracks optional LED work lights Tilt-forward cab for easy maintenance access

Like New Machine, Cab, A/C, Heat, Bluetooth, Stereo, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 18" Bucket w/Teeth, 24" Clean Out Bucket

Lakebay, WA

Comes with a 36” smooth bucket and a 24” toothed bucket. 

Sweet Home, OR

EROPS (Cab), A/C, Heat, Blade, Auxillary Hydraulics, Hydraulic Thumb, 20" Bucket, 36" Cleanout Bucket

Raynham, MA

OROPS (Open Cab), 4-Way Blade, Auxillary Hydraulics, Hydraulic Thumb, Quick Coupler, 24", 36" Buckets w/Teeth


OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Thumb, 18" Bucket w/Teeth, 30" Cleanout Bucket

Fort Myers, FL

This Doosan 34,000 lb machine is tight, leak free, has great tracks and 36'" bucket with almost new teeth and side cutters. This is a zero clearance machine for working in tight places.
Key Specifications
Engine: Perkins 1204F, ~113 hp, Interim Tier 4 compliant.
Operating Weight: Around 33,500 - 35,000 lbs (15.3 tons).
Digging Depth (Max): ~19' 8" (6m).
Reach (Max): ~28' 5" (8.6m).
Bucket Digging Force: ~24,471 lbs (111 kN).
Arm Digging Force: ~13,228 lbs (59 kN).
Travel Speed (Max): ~2.9 - 3.1 mph (4.7 - 5 km/h).
Hydraulic System: Relief pressure around 4978 psi, main pump flow ~60 gpm.
Swing Torque: ~34,000 ft-lbs.
Transport Dimensions: Around 26' 3" L x 8' 5" W x 10' 1" H (7990mm x 2590mm x 3060mm). 
Key Features
Reduced Tail Swing (LCR): Designed for better maneuverability in confined areas.
Operator Comfort: Spacious cab, A/C, heated air-suspension seat, low noise/vibration.

Granby, CO

Yorba Linda, Ca

OROPS (Open Cab), Blade, Auxilliary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth
Can deliver anywhere at renters expense

Scott, LA

New 2025 Deere 26P-TIER | EROPS (Cab), A/C, Heat, Blade, Auxillary Hydraulics, Coupler, Hydraulic Thumb, 12" & 18" Trenching Buckets, 30" Clean Out Bucket, Auger, Hammer

Fayetteville, NY

EROPS (Cab), A/C, Heat, Long Stick, Blade, Auxillary Hydraulics, Hydraulic Thumb, 24" Bucket

North Pole, AK

OROPS (Open Cab), Blade, Auxillary Hydraulics, Quick Coupler, Hydraulic Thumb, 12" & 36" Buckets || 12,000 lbs. Operating Weight, Extremely Strong & Powerful

Atlanta, GA

Cab, A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 30" Bucket w/Teeth

Hattiesburg, MS

EROPS (Cab), A/C, Heat, Blade, Street Pads, Auxillary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth

Vernal, UT

BRAND NEW XCMG XE35U Mini-Excavator-EROPS (Cab), A/C, Heat, Blade, Dual Auxillary Hydraulics, Manual Coupler, Hydraulic Thumb, 24" Bucket w/Teeth, Tier 4F, Extra Rear Counterweights, Full Warranty 3 Years/3,000 Hours ||| Engine Model: Yanmar 3TNV88F

Emissions: EPA Tier 4 Final compliant

Horsepower: 24.4 hp at 2,200 rpm

Torque: 62.9–69.5 ft-lb at 1,320 rpm

Displacement: 100 in³

Performance
Bucket Digging Force: 6,430 lbf

Arm Digging Force: 4,564 lbf

Travel Speed: 1.4–2.2 mph

Swing Speed: 9 rpm

Gradeability: 30°

Boom Swing: 75° left / 50° right

Hydraulic System
Pump Type: Load-sensing axial-piston, variable displacement

Max Flow Rate: 28.5 gal/min

Auxiliary Hydraulic Flow: 10.6 gal/min

System Pressure:

Arm/Bucket/Travel: 3,916 psi

Swing: 2,989 psi

Additional Features
Enclosed cab with HVAC or open canopy option

Hydraulic thumb and quick coupler available

Rubber tracks standard, steel tracks optional

LED work lights

Tilt-forward cab for easy maintenance access



New Kubota U35-4 Mini-Excavator | EROPS (Cab), A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth

Middletown, DE

New 2024 Intrepid KM100, Telescoping Loader
Kubota Diesel Engine, 1,750 lbs lift, 10' pin height, 11 mph travel,  Turf tires, 52" Bucket (PICTURES SHOWN DO NOT INCLUDE THE ATTACHMENTS IN THE SALE PRICE) ADDITIONAL ATTACHMENTS AVAILABLE FOR SALE.  Forks $1,000, Log Grapple $4,300

OROPS (Open Cab), Blade, Auxillary Hydraulics, Hydraulic Thumb, 12", 18", 24" Bucket w/Teeth

Yucaipa, CA

Oakley, CA

EROPS (Cab), A/C, Heat, Blade, Auxilliary Hydraulics, Hydraulic Thumb, 24", 36" Buckets w/Teeth

New York

Pine Island, MN

2025 Deere 35 P-TIER Mini-Excavator | Cab, A/C, Heat, Blade, Long Arm, 11' 4" Max Dig Depth, Counter Weight, Auxilliary Hydraulics, Hydraulic Thumb, 12 ",18", 24" Buckets w/Teeth  

Aurora, CO

Cab, A/C, Heat, Blade (4-Way), Auxilliary Hydraulics, Hydraulic Thumb, 12", 24" Buckets w/Teeth, 48" Grading Bucket.

Belfair, WA

Cab, A/C, Heat, Blade, Auxilliary Hydraulics, 12",16" Bucket w/Edge, 24" Bucket w/Teeth

Sarasota, FL

EROPS (Cab), A/C, Heat, Blade, Auxillary Hydraulics, Hydraulic Thumb, 24" Bucket w/Teeth

Mini Excavator

Machines ready to ship

2024 Miva VA13

2024 AGT H12R

2024 DigMaster DM100

2025 Visec VC13C

2025 AGT QH13R

2026 AGT QH12

2024 Industrial FF13R

2025 Digmaster DM200

2025 Visec VC180K